Smoking area near here

Plume-X backstage trick! I'd like to say that I'm up for the suck... but I'm going to share this with you so that more people don't do the same thing.

A Huge Boost to Ploom X's Throat Hit!? Secret Hack... or So I'd Like to Say, But I'm Sharing This So Others Don't Try the Same Thing. Ploom
Ploom PloomX Review PloomX980 yen PloomX Mobius PloomX Camel PloomX CouponIncluding PR
⚡ 【早見表】プルーム(Ploom AURA / X ADVANCED)で安全に吸いごたえを上げる正攻法
危険な改造や極端な詰め込みはNGスティックを無理に潰したり異物を挟んだりする非公式な裏技は、チャンバー内部の詰まりや加熱不良・故障の原因となるため絶対に行わないでください。
正攻法①:予熱完了後「5秒待ってから」ゆっくり吸うバイブレーションで加熱完了が通知されてから5秒ほど待ち、熱がスティック中心まで行き渡ってから3〜4秒かけてゆっくり深吸いすると驚くほど濃い煙が出ます。
正攻法②:高濃度銘柄「エボ(620円)」を選ぶ現行機(約320℃加熱)にプレミアム銘柄「EVO(エボ:1箱620円)」や「メビウス・ディープ・レギュラー(590円)」を組み合わせれば、純正のままで最強のキック感が得られます。

Good evening,Heated cigarette blogger Genki (@MOQLOG_JP)It is.

I didn't have anything to write about intensely today, so I was thinking about what to write about while riding my bike.

But if all I did was news and reviews, it wouldn't be interesting... I was thinking about that, and I suddenly thought of Plumess's backstory.

If that one works well,Maybe Plume-X has become more rewarding to smoke! So, todayPlume-XのIncreased sucking sensationI would like to share with you about Operation.

Please be aware that we are not responsible for any problems that may occur.

WRITER / Author

Heated Cigarette Blogger

One of the largest heated tobacco and e-cigarette bloggers in Japan, he operates "MOQLOG" (MOQLOG). One of Japan's leading heated cigarette bloggers, he started his operation in March 2016, and as an expert on heated and e-cigarettes that are replacing paper cigarettes, he provides a variety of information on cigarettes.

assistance in news gathering:oricon news Weekly Playboy (lessening the significance or value of the previous word) the likes of

Plume X Backstage Tips! Operation Smoke Up!

Plume-X has a heating temperature as high as that of Icos and a fuller smoking experience, but we would like to increase the smoking experience a little more, if not to the same level as Icos! We drafted the plan with this in mind.

Plume-X sticks are a waste because the tip is not heated at all.

If that part could be heated properly, wouldn't it be more satisfying to smoke? This is the hypothesis that we have made in this project..

You may think that more than half of the people who read this article are bored... but that is exactly what I was doing!

To be honest, the content is also written by a heated cigarette blogger, or rather a person of leisure, so only those with time on their hands are welcome to join us.

The backstage technique to increase the sucking response: First, check the normal conditions.

This is a picture of a Plume-X cigarette butt, and as you can see, the area around the joint of the roll is the most heated, not the tip.

The discoloration of the paper also indicates that it is being heated from the surroundings.

Photo of a half of a cigarette butt, the tobacco leaf at the tip is also crusty but not burnt at all, and it is clear that this area is not heated.

It's kind of a waste to have so many tobacco leaves packed in here... Don't you think so, too?

Backstage "stapler" that was effective in Plume S.

Stick the staple lead into the side of the stick, starting from the most heated area and working toward the less heated area.

The idea is that by heating the stapler core, the tobacco leaves in the unheated part of the stapler will be heated through the core. This is the idea behind the stapler.

I got very greedy and stuck four sticks in the front, back, left, and right.

I could have stuck it in more, but it's no longer a hassle, so I'll smoke it here.

Plume X backstage "stapler ver." to smoke!

genki
genki

I think the smoking quality has increased so-so....

There was no weird taste or anything from the staples sticking in, so I guess it's an ant.

To tell the truth, as I wrote in the title, I wanted to see a more dramatic "increase.

I feel that it is a little more upscaled, but not so much that it is shocking, and this is how I feel about it.

Please take a look at how it really was, and see if you can crack it open a bit.

Plume X backstage "stapler ver." cracked.

The staples that have been inserted into the cigarette sticks have been heated at high temperatures and are slightly discolored.

Of course, the heated part is almost the same... but is it?

It's really just a little bit, but I think there are more discolored areas due to heating (sweat).

The difference is very obvious due to the fact that I could not stick it too far down....

Comparison of regular cigarette sticks and back-up "stapler ver.

It might be the same if I tried many of them, but the feeling I got from trying them anyway was that the stapler ver. had a wider heating range, although it was only a few millimeters.

Is the sucking more intense for these few mm? I wonder. This concludes the verification for now.

Conclusion! We do not recommend this subterfuge!

I am not sure if I would call this a subterfuge,In conclusion, I do not recommend to increase the sucking power by this method! I will tell you this first!.

There are two reasons. One is that it takes a lot of time and effort anyway, and the price is not that different, so if you weigh the time and effort against the price (better smoking experience), it is better to smoke as is.

The other one is important, but if it is not done properly, the heating system of the device itself could be damaged or scratched.

It is stupid to oshaka the device with such nonsense, so I ask everyone not to imitate me.

Summary of tricks to improve Plume X's smoking experience

I apologize for the ending, which was written by a man of leisure and was not very tight.

But it was much more fun than just reprinting press releases and writing the ever-familiar reviews.

Of course, that kind of up-to-date information is important, but it would be boring if that were all there is.

I am not going back to the basics, but I would like to do something interesting! If you have any suggestions, please feel free to contact me via twitter or other means.

Well, that's all for today, thank you for your patience until the end!

How Was This Flavor?

Aggregates ratings in 1 click from users aged 20 or older who have actually used the selected brand. By pressing the button, you agree that you are 20 or older and that your response will be used for anonymous aggregation. Response counts are displayed from 5 or more. Options are limited to brands registered in the product master.

1 Did not suit me — 5 Liked it

When you select a brand, the average is displayed if there are 5 or more responses.

Also rate sweetness, menthol, etc.

Comment

  1. こりしろ says:

    Just an idea, but what about wrapping aluminum foil around the tip?
    I think it might come off when I pull out the stick. But the heating range seems to be extended.

  2. 熊八 says:

    You can do it a second time by using a glow hyper that is about the same thickness (use the hyper that is supposed to be more heated than the X, though you will lose some flavor). The taste will be a little bit lower, though.)

  3. 加熱タバコに切り替え中 says:

    Rather than inserting a staple needle, it would be easier to insert a heating plate pulled from an Irma stick that has been sucked out.

en_USEnglish
Moclog is a blog about tobacco.
You are over 20 years old, correct?
No, sir.
🌐 English