Summary of Glow Hyper X2 LED lighting and blinking patterns and how to reset.

Article content updated: 2026-09-23 | Information checked: 2026-09-23

glo HYPER X2 LED blinking and reset

HYPER X2 is a different model from HYPER AIR and HYPER PRO. Check the indicators for low battery or out-of-range temperature, and if the issue persists even after charging or returning to normal temperature, check the reset procedure described in the official X2 guide. The procedure of pressing and holding the Standard mode button for about 7.5 seconds is based on the X2 guide. Do not apply it to other models; if there is no improvement, contact official support.

glo HYPER X2 Official User Guide (PDF) ／/ Troubleshooting Guide by Model

Official guide verified: 9/23/2026

Good evening,Heated cigarette blogger Genki (@MOQLOG_JP)It is.

Mr. BAT's all-new "Glow Hyper X2The "Mere Old Man" has been on sale since the 25th, and many of you may have already gotten your hands on a copy.

The Glow Hyper X2 is,Barrel Designにshutter door, ,Larger, easier-to-see LEDsThe specs are the same,appearanceandease of useis significantlyupgradeunderNEW Modelis.

Today I'm going to introduce one of the main features, "LEDAbout the shining of the "IAll PatternsWe have compiled a.

Troubleshooting for problems is also included for your reference.

Glow Hyper X2 LED light

The newest addition to the Glow Hyper series, the Glow Hyper X2, not only features a new design, but also several new features that improve ease of use.

One of these is the upgraded LED lights, which are now displayed much larger at the top.

Since visibility has been greatly improved, there will be more occasions when you will see LED lights, so it will be more useful to know the lighting and blinking patterns of LED lights!.

In addition, LED lights display the following information.

You can approximately tell by feel how well it is charging and how long it takes to heat up, so it is a good idea to just remember the problem alerts.

Charging status during charging glo hyper X2

During charging, how much charge is available can be determined by the LED lighting pattern.

LED Light Patterns	meaning
	~ 25%OFF
	～ 50%OFF
	～ 75%OFF
	～ 95%OFF
	～ 100%OFF

There are a total of five LED patterns that indicate the state of charge, and for now, it seems to be no problem to remember that 100% when all lights are on, and 25% increments for the rest.

Incidentally, the Glow Hyper X2 takes about 3 hours to fully charge, so we recommend charging it before going to bed after a day of use.

Please note that if the battery runs out of charge in the middle of the day, it will take much longer to complete recharging.

Full charge: approx. 3 hours

Residual heat time glo hyper X2

You can see how much time elapses from the time the stick is inserted until heating is complete.

normal mode	boost mode
0 - 5 seconds elapsed	0 - 3.2 seconds elapsed
5 - 10 seconds elapsed	3.2 - 6.4 seconds elapsed
10 - 15 seconds elapsed	6.4 - 9.6 seconds elapsed
15 - 20 seconds elapsed	9.6 - 12.8 seconds elapsed
Preheating complete	Preheating complete

The LED memory increases one by one according to the number of elapsed seconds. It is no problem if you remember that "When all the LEDs are lit, you can smoke!

Once the preheating is complete, the vibration will be activated, which can be used as a guide.

The residual heat time for each mode is set as follows.

Normal mode: 20 sec.
Boost mode: 15 sec.

Smokable time glo hyper X2

When the residual heat is complete, smoking is ready, but the Glow Hyper X2 uses a time count instead of a puff count, with an LED indicating the remaining time available for smoking.

normal mode	boost mode
0 seconds to 1 minute elapsed	0 to 45 seconds elapsed
1 to 2 minutes elapsed	45 seconds to 1 minute and 30 seconds elapsed
2 to 3 minutes elapsed	1 minute 30 seconds to 2 minutes 15 seconds elapsed
3 minutes to 3 minutes 50 seconds elapsed	2 minutes 15 seconds to 2 minutes 50 seconds elapsed
10 seconds left	10 seconds left

For some reason, which was not listed in the manual, the LEDs also inform you of the time you can smoke.

Basically, the possible time is just divided into four segments, but when the last one starts blinking, it signals the last 10 seconds, and at this time, the vibration is activated once at the same time, so do not forget to take a last puff.

Smoking time available for each mode is as follows.

Normal mode: 4 min.
Boost mode: 3 min.

Battery remaining glo hyper X2

When in standby (not heating), pressing the Normal or Boost button will display the current battery level on the LED.

LED Pattern	meaning
	Battery remaining: 100% Fully charged
	Battery remaining: 75%
	Battery remaining: 50%
	Battery remaining: 25%
	Battery level is low. Charging required

As for the battery level, please note that if only one light comes on, it is not 25%, but less than that, which means "needs to be charged".

In a typical electronic device, we tend to think 50% if two of the four are lit, but in Glow Hyper X2, it indicates 50% to 25%.

When you check the battery level before going to bed, you may think, "There are two lights on, so there is half a battery left!" and do not recharge the battery, it may run out of charge immediately the next day.

The battery capacity of the Glow Hyper X2 is as follows.

Battery capacity: 3,250mAh

Error indication glo hyper X2

If the LEDs show the following during standby or other conditions, there may be some kind of malfunction or trouble.

error code	cause	Troubleshooting
	Low charge level	Charge the main unit
	Battery temperature out of proper range The amount of battery voltage is outside the proper range. Product temperature out of proper range	Pause smoking or charging for a few minutes, Or refrain from using the product until the temperature of the product has stabilized.
	The amount of battery voltage is outside the proper range. Battery current level out of proper range There is a problem with charging	Try resetting the product
	The amount of battery voltage is outside the proper range. There is a problem with charging	There are serious problems that are irrecoverable. Contact Customer Center.

Particularly important to remember are the two patterns in which all LEDs blink.

If only the surroundings are all glowing, first try resetting the product, and if that does not work, contact Customer Center.

If the ambient + center flashes, we recommend that you stop using it immediately and contact Customer Center.

How to reset the unit

I reset it once to try it out and it is very easy to do.

When the button for normal mode is held down for a long time, the vibration of normal heating start is activated about 3 seconds later, and when it is ignored and held down, about 5 seconds after that, all LED lights are turned on plus a long vibration is activated and resetting is completed.

The point to remember in the reset is,(1) Use the buttons in normal mode., ,(2) Ignore the vibration when heating and keep pressing the button.Two points.

It is easy to remember!

glo hyper X2 LED pattern summary

An LED that is easier to see does not mean much if you do not know what it means.

Of course, the contents are all intuitively obvious, but there are only four error codes, and only two of them are particularly important (all flashing), so it would be good to remember them along with the reset method.

Also, it may be superfluous, but although Glow Hyper X2 is cheap, it is no exaggeration to say that it is a precision machine inside.

It is quite possible that initial defects or problems may occur while using the product, so we recommend that you register your product properly!.

The only disadvantage is the hassle, and it is a good idea to register your product warranty in case of emergency.

How Was This Flavor?

Aggregates ratings in 1 click from users aged 20 or older who have actually used the selected brand. By pressing the button, you agree that you are 20 or older and that your response will be used for anonymous aggregation. Response counts are displayed from 5 or more. Options are limited to brands registered in the product master.

Brand to Rate Select a Brandネオ・テラコッタ・タバコ・スティック・glo hyper用ネオ・フレスコ・メンソール・スティック・glo hyper用ネオ・トロピカル・スワールケント・ネオスティック・シトラス・フレッシュ・JKent Neostick Rich Tobacco XKent Neostick Mint Boost Xケント・ネオスティック・ブライト・タバコ・Jケント・ネオスティック・スムース・フレッシュ・Jケント・ネオスティック・インテンスリー・フレッシュJケント・ネオスティック・ダーク・フレッシュ・Jケント・ネオスティック・ベリー・ブースト・Jケント・トゥルー・リッチ・glo hyper用ラッキー・ストライク・メンソール・glo hyper用ラッキー・ストライク・リッチ・タバコ・glo hyper用Lucky Strike Smooth Cigarettesケント・トゥルー・タバコ・glo hyper用ケント・トゥルー・メンソール・glo hyper用ケント・トゥルー・リッチ・タバコ・glo hyper用ケント・トゥルー・リッチ・メンソール・glo hyper用ケント・トゥルー・ベリー・ブースト・glo hyper用ネオ・マイルド・タバコ・glo hyper用ネオ・スムース・タバコ・glo hyper用ネオ・クラシック・タバコ・glo hyper用ネオ・フレッシュ・メンソール・glo hyper用ネオ・クラシック・タバコ・hyper用ネオ・フリーズ・メンソール・スティック・glo hyper用ネオ・マックス・メンソール・スティック・glo hyper用ネオ・ブリリアント・ベリー・スティック・glo hyper用ネオ・トロピカル・スワール・スティック・glo hyper用ネオ・アークティック・メンソール・hyper用ネオ・アイスド・メンソール・hyper用ネオ・チルド・メンソール・hyper用ネオ・ブリリアント・ベリー・hyper用ネオ・ブリリアント・トロピカル・hyper用ネオ・ブリリアント・レッドフルーツ・hyper用ネオ・ブリリアント・マスカット・hyper用ネオ・ブリリアント・ワイルドベリー・hyper用ラッキー・ストライク・ダーク・タバコ・glo hyper用ラッキー・ストライク・ダーク・メンソール・glo hyper用ラッキー・ストライク・ダーク・イエロー・メンソール・glo hyper用ラッキー・ストライク・スムース・タバコ・glo hyper用ラッキー・ストライク・ベリー・メンソール・glo hyper用ラッキー・ストライク・ベリー・ブースト・glo hyper用ラッキー・ストライク・トロピカル・ブースト・glo hyper用ラッキー・ストライク・ベリー・スイッチ・hyper用ラッキー・ストライク・トロピカル・スイッチ・hyper用ヴァルト・ダーク・タバコヴァルト・バランスド・タバコヴァルト・クラシック・タバコヴァルト・ラウンデッド・タバコヴァルト・ブライト・チェリー・クリックヴァルト・アイスド・メンソール・クリックヴァルト・メンソール・クリックヴァルト・ミント・クリックヴァルト・ベリー・クリックヴァルト・アイスド・ベリー・クリックヴァルト・メロン・クリックヴァルト・レッドフルーツ・クリックヴァルト・ブライト・ピーチ・クリック

12345

1 Did not suit me — 5 Liked it

When you select a brand, the average is displayed if there are 5 or more responses.

Also rate sweetness, menthol, etc.

🛠 この診断・公式リセット手順で症状は解決しましたか？

手順ごとの解決状況を匿名で集計し、機種別サポートDBの改善に活用しています。改善しない場合は無理な分解や冷却を行わず、各メーカー公式窓口へご相談ください。

✅ 解決した（0)❌ 解決しない・交換案内を見る（0)

【メーカー公式サポート・交換窓口（一次情報）】

• IQOS（PMJ）公式サポート・オンライン故障診断
• Ploom / with（JT）公式サポート・お問い合わせ
• glo（BATJ）公式サポート・FAQ