| 通常(スタンダード)モード | メインボタンを長押しして起動(予熱約20秒・HYPER proは約15秒)。約4分〜4分30秒間じっくり吸えるバランス重視モードです。 |
|---|---|
| boost mode | 高温で素早く加熱(予熱約15秒)し、濃厚なキック感と吸いごたえを楽しめる強加熱モードです(吸引時間は約3分〜3分30秒)。 |
| 美味く吸うコツ | スティックは奥の線までまっすぐ挿し、予熱完了のバイブレーション後に「ゆっくり長く(3〜4秒かけて)」吸い込むと蒸気がしっかり出ます。 |
Hello,Heated cigarette blogger Genki (@MOQLOG_JP)It is.
gloSpeaking of,Reasonable pricingIn "Heated tobaccoPerfect for the debut ofdeviceOne of the
Are you thinking of graduating from smoking? Many of you may be thinking, "I'm about to quit smoking..." or you may have been encouraged by others to try glow cigarettes.
In this article, we will focus on the latest model Glow Hyper X2 and how to smoke glow for such glow debutantes (for beginners), so please take a look at it.
- How to smoke glow
- Basic Glow Smoking Method [5 Steps].
- How to smoke a glow (1) Open the slide
- How to smoke a Glow (2) Insert the cigarette stick into the insert.
- How to smoke Glow (3) Press the heating button to start heating.
- How to smoke Glow (4) Smoking is possible when all LED lights are lit.
- How to smoke Glow (5) When the LED light turns off, smoking is finished.
- Glow 2 heating mode features
- Glow Point to smoke using two different heating modes.
- When you want to smoke a glo in boost mode (1) When you don't have time
- When you want to smoke a glo in boost mode (2) When you are sleepy
- When you want to smoke a glo in boost mode (3) When you are in a high state of mind
- When you want to smoke a glo in normal mode (1) When you are relaxing
- When you want to smoke a glo in normal mode (2) When smoking at home (indoors)
- When you want to smoke a glo in normal mode (3) When you are with many people
- Summary of points to smoke using different heating modes of glo
- Three things to keep in mind when smoking Glow. Three things you should not do.
- Tips on how to smoke a good glow!
- Summary of how to smoke glow
- How Was This Flavor?
- Check prices and compatible devices
How to smoke glow
Not only Glow, but many people use modern heated tobacco devices without reading the instructions because they can imagine how to use most of them just by looking at them.
I'm one of those people, and to be honest, I haven't read the manual in a few years (sweat).
However, the glow has aTwo heating modesis on board, and it would be a shame not to take advantage of it.
Many of you also use the older Glow Hyper Plus, so we will explain how to smoke glow along with the new Glow Hyper X2.
Basic Glow Smoking Method [5 Steps].
First of all, all of the Glow Series have one thing in common.Basic Glow Smoking MethodThis section describes the following
However, this is a story at a level that can be operated intuitively, so you should be able to read it easily, including by way of a review.
I will explain each step with pictures, so if you just bought it, please use it as an instruction manual! If you just bought it, please use it as an instruction manual.
*Jump to the description of each step.
- What to prepare
- ·Glow main unit(Glow Hyper X2, Glow Hyper Plus)
·Cigarette Stick for Glow(KENT, neo, KOOL, LUCKYSTRIKE)
How to smoke a glow (1) Open the slide
- STEP01Sliding shutter door
- STEP02Cigarette stick insert opens
The cigarette stick insert opens with a crackling sound.
This shutter door is a specification from Glow Hyper X2 and is one of my favorite gimmicks.
- STEP01Slide the slide cover to the side.
- STEP02Cigarette stick insert opens
All series up to the Glow Hyper Plus have a slide cover system, which is slid to the side to open the cigarette stick insertion slot.
This slide cover is fragile and should not be handled roughly.
How to smoke a Glow (2) Insert the cigarette stick into the insert.
For Glow Hyper X2

This picture is a little too tight, but the important thing is to insert it just enough to see the line.
Every stick is marked with a line, so check to see if you can see the line after inserting it.

The line is completely obscured, which means it is inserted too far.
Note that if you insert it too far, the "tobacco stick" will be crushed inside, and not only will the temperature not be transmitted properly, but the air passage will also be blocked, making it impossible to enjoy a good smoke!
For Glow Hyper Plus

This is the best insertion condition! If you can see the dotted line, it is OK.
Be aware that the glow cigarette stick can easily be pushed all the way in due to its long length.

As shown in the photo, if the flavor ring or line is inserted until it cannot be seen, it is inserted too far.
Like the Glow Hyper X2, it does not smoke well, so let's pull it out a bit.
When inserting a tobacco stick, do not insert it until the line is no longer visible!
How to smoke Glow (3) Press the heating button to start heating.
For Glow Hyper X2

The Glow Hyper X2 has two heating buttons and their location is now on the side.
The smaller button is for boost mode and the larger one is for normal mode, both of which can be pressed and held to start heating.

To start heating, press and hold each button for 3 seconds.
The differences between the modes are discussed below, but if you are in a hurry or short on time, you can use the button for boost mode!
For Glow Hyper Plus

All devices in the series up to the Glow Hyper Plus have only one button located in the center of the upper part of the device.
The Glow Hyper Plus is designed to select a mode by the number of seconds it is pressed and held. 3 seconds is the normal mode, and 5 seconds is the boost mode.

It's easier said than done since there is only one button, but my wife was unaware of the boost mode until recently (sweat).
The latest Glow Hyper X2 has two buttons because it is difficult to understand the operation of the mode selection, which has been installed.
How to smoke Glow (4) Smoking is possible when all LED lights are lit.
For Glow Hyper X2

The Glow Hyper X2 is ready for smoking when all the LED lights on the opposite side of the insertion port light up + the device vibrates.
The LED light is now bigger and easier to see, another improvement from the old Glow Hyper Plus.
For Glow Hyper Plus

The basic operation is the same, and smoking is possible when all LED lights are turned on + vibration is made.
This LED light has the disadvantage of being difficult to see during the daytime, and in the Glow Hyper X2, it is now positioned larger and higher up for better visibility.
How to smoke Glow (5) When the LED light turns off, smoking is finished.

When smoking, the LED light turns off one quarter at a time according to the elapsed time.
Smoking is finished when all LED lights are off, so remove the cigarette stick to finish a session.
Cigarette butts should be disposed of as burnable trash, but if they are thrown away as is, they will emit an odor, so if possible, throw them in a trash can with a lid.
Cautions for removing the stick after glow smoking is finished

The same applies when inserting, but be sure to pull it out perpendicular to the insertion opening when pulling it out.
If you try to pull it out at an angle, the heated and dried stick may break inside.
It is difficult to clean, and if clogged, it will not be able to suck for a while, so please be careful only when pulling it out or inserting it.
Cigarette sticks should be pulled out and inserted straight and perpendicular to the insertion opening!
Glow 2 heating mode features
As mentioned in the explanation of the basic Glow smoking method, Glow is equipped with two heating modes, which can be used depending on your mood or situation.
What is the difference between different heating modes? Also, please refer to the following information on how to use different heating modes for different smoking situations.
How to select the glow heating mode (how to use)
For Glow Hyper X2

Of the two buttons on the side, the small button on top is the "Boost Mode" button.
The large button at the bottom is the "Normal Mode" button.
For Glow Hyper Plus

Prior to Glow Hyper Plus, the device had only one button, so the time it takes to press and hold the button is used to select the mode.
normal mode... Press and hold the button for 3 seconds to vibrate once and start heating in normal mode.
boost mode...If you press and hold the button for 5 seconds, it will vibrate once at the 3 second mark, and if you continue to hold it down, it will vibrate twice at the 5 second mark, and heating will begin in boost mode.
glo device with two heating modes
| glo device | Heating mode |
|---|---|
| glo hyper X2 | boost mode normal mode |
| glo hyper + | boost mode normal mode |
| glo hyper | boost mode normal mode |
| glo pro slim | boost mode normal mode |
| glo pro | boost mode normal mode |
| glo nano | normal mode |
| Other glo glo mini glo series2 GLO (first generation) | normal mode |
All of Glow's recent devices have two modes, boost mode and normal mode, but for the Glow Pro and earlier series, only normal mode is available.
Different heating modes of glo
| Comparison items | boost mode | normal mode |
|---|---|---|
| Heating temperature | 270 degrees | 250 degrees |
| Residual heat time | 15 sec. | 20 sec. |
| Smoking time | 3 minutes | 4 minutes |
Boost mode, as shown in the table, is characterized by higher heating temperatures and shorter residual heat times.
However, there is a disadvantage in that the time available for smoking is reduced because it requires more power than the normal mode.
Glow Point to smoke using two different heating modes.
Now that we've covered how to operate the two heating modes on the Glow and the differences between them in terms of specifications, what difference does that make in terms of actual smoking time?
When is it best to use either mode? I would like to suggest the points to smoke using two different heating modes of glow while also taking into account its features.
When you want to smoke a glo in boost mode (1) When you don't have time

Boost mode is the recommended heating mode when you are short on time, as the short residual heat not only allows you to start smoking immediately, but also allows you to gulp down nicotine in a short period of time.
There are only five minutes left until the departure time of the Shinkansen!
...The work is going on too long and I only have 5 minutes for a break!
I had a quick smoke before heading to my next client!
The Glow's Boost mode takes only 15 seconds to start smoking and 3 minutes to finish.
When you want to smoke a glo in boost mode (2) When you are sleepy

Boost mode heats the smoke at a higher temperature, so you can enjoy a guttier smoke than in normal mode. How about this for waking up from sleep?
I watch too much TV late at night and am sleepy!
Work is too monotonous and sleepy!
It is a warm sunny day and I'm sleepy!
The boost mode of the glow isThe high heating temperature of 270 degrees Celsius greatly improves the smoking experience!
When you want to smoke a glo in boost mode (3) When you are in a high state of mind

Boost mode heats the smoke at a higher temperature, so you can enjoy a guttier smoke than in normal mode. If you are frustrated, smoke a harder one to calm down.
When I was unreasonably angry with my boss!
When a business partner is unreasonably angry with me!
He is fighting with his wife!
The boost mode of the glow isThe high heating temperature of 270 degrees Celsius greatly improves the smoking experience!
When you want to smoke a glo in normal mode (1) When you are relaxing

Boost mode is a short smoking time and a strong stimulus, so when you are relaxing, use the normal mode to relax and enjoy the true flavor of the flavors.
Sunday afternoon, nice weather.
Smoke in the garden after taking a bath
Chatting with fellow smokers in the smoking area
Glow's normal mode allows you to smoke for 4 minutes, so you can smoke leisurely.
When you want to smoke a glo in normal mode (2) When smoking at home (indoors)

Boost mode increases the "smell" as well as the response to smoking due to the high heating temperature, so the normal mode is recommended for indoor use.
Smoke in your room (if you can)
...Smoke quietly under the ventilation fan
·Sneak a smoke on the tray
The normal mode of glow also smells, but not as much as the boost mode.
When you want to smoke a glo in normal mode (3) When you are with many people

Boost mode increases the "smell" as well as the smoking response due to the high heating temperature, so the normal mode is recommended when in the company of others.
When smoking at a barbecue
. when I go back to my parents' house and smoke in the yard (just in case).
When I'm out drinking with my buddies.
The normal mode of glow also smells, but not as much as the boost mode.
Summary of points to smoke using different heating modes of glo
The higher the temperature at which tobacco leaves are heated, the more "nicotine" and "odor" they tend to produce.
Therefore, the boost mode, with its higher heating temperature, is characterized by a stronger "sucking response" and "odor" than the normal mode.
Cigarettes are disliked because of their "smell," by far, so it is best to avoid boost mode when you are with people or indoors.
On the other hand, boost mode is recommended when you are out and want to enjoy a gutsy smoke or when you are short on time, so please try using it in different ways depending on the scene or situation!
Three things to keep in mind when smoking Glow. Three things you should not do.
We have explained how to smoke glow, but there are three things you should never do.
Please note that this may not only prevent tasty vaping, but may also cause malfunctions or defects.
How not to smoke with GLO (1) Smoking twice (reheating the tobacco stick)
Some people try to reheat a "tobacco stick" that has been smoked once and smoke it again, but this is not only impossible but may cause a malfunction, so quit trying to do so.
Looking at the cigarette butt, it looks as if it could still be smoked, but the tobacco leaf inside is burnt to a crisp, and even if it is heated again, not only is no vapor produced, but only a foul odor wafts out....
It does not look good for the body and should not be reheated.
How not to smoke with a GLO (2) Smoking without a cigarette
As you can imagine, the main body of Glow weighs around 100 grams, so if you try to hold a cigarette in your mouth, the stick cannot bear the weight of the main body and will break.
At the same time, the glow itself should not fall...if it falls on concrete, it is likely to be damaged.
And even if it doesn't break, you shouldn't do it, because the broken stick will remain in the body and you won't be able to smoke until you remove it completely, etc. Nothing good will come out of it!
How not to smoke with a glo (3) Inserting the stick too far
As explained in the basic glow smoking instructions, if the stick is inserted too far, it will heat unevenly and block the air passage, resulting in a much poorer taste.
It seems to increase the sucking response! Some people intentionally insert it deeper, but this is counterproductive, so don't do it.
Even if it has been inserted too deeply, it will return to its original position by lifting it up gently, so please do not panic.
Tips on how to smoke a good glow!
Finally, here are some tips on how to smoke a good glow.
That is, you should "clean" the glow unit when you are done smoking a box.
(in Japanese history)This is the official GLO recommended timing for cleaning)
Honestly, I know it's a hassle, but cleaning it will prevent the taste from deteriorating, so how about cleaning the glow at the end of the day?
How to clean Glow for a good smoke: Glow Hyper X2

- glo hyper X2 Body
- Cleaning stick (included in starter kit)
- STEP01Check that the unit is cool (not hot)
If you try to clean the brush when it is hot after just sucking, the brush will melt, causing malfunctions and problems, so make sure it is cool before cleaning.
- STEP02Open shutter doors and doors for cleaning
Open the top shutter door and remove the bottom (bottom) cleaning door. The cleaning door can be opened with the tip of the cleaning stick included in the starter kit.
- STEP03Clean the empty holes by passing the cleaning stick brush through them.
Clean the inside of the cleaning stick by passing the brush through it from the top and bottom. Note that depending on how dirty it is, yanitori may fly out when you pull it out.
- STEP04Put back shutter door and door for cleaning and finish cleaning.
How to clean Glow for a good smoke: Glow Hyper Plus

- glo hyper + body
- Cleaning stick (included in starter kit)
- STEP01Check that the unit is cool (not hot)
If you try to clean the brush when it is hot after just sucking, the brush will melt, causing malfunctions and problems, so make sure it is cool before cleaning.
- STEP02Open slide cover and cleaning flap
Open the top slide cover and open the bottom (bottom) cleaning flap. The cleaning flap is spring-loaded, so you can easily open it by slightly shifting it with your finger!
- STEP03Clean the empty holes by passing the cleaning stick brush through them.
Clean the inside of the cleaning stick by passing the brush through it from the top and bottom. Note that depending on how dirty it is, yanitori may fly out when you pull it out.
- STEP04Close slide cover and cleaning flap to finish cleaning.
Cleaning sticks used for cleaning are also clean!

Both the cleaning stick for Glow Hyper X2 and the cleaning stick for Glow Hyper Plus can be washed in water, so do not forget to wash them in water after use for cleaning.
Please note that if you do not wash them in water, you will stain them every time you clean them.
After washing in cold water, wipe off the water with a tissue to prolong the life of the product!
Please keep in mind that if you lose or damage the Glow Hyper X2 cleaning stick or the cleaning door on the bottom of the unit, you can contact Customer Center and they will send you a spare.
glo Customer Center:0120-010-657
Summary of how to smoke glow
Glow is a device with two heating modes, so please take advantage of the different usage depending on the scene or situation.
Smoking a glow itself is not that difficult, but we hope you will enjoy your glow life, taking into consideration the cautions and tips for a good smoke.
How Was This Flavor?
Aggregates ratings in 1 click from users aged 20 or older who have actually used the selected brand. By pressing the button, you agree that you are 20 or older and that your response will be used for anonymous aggregation. Response counts are displayed from 5 or more. Options are limited to brands registered in the product master.
1 Did not suit me — 5 Liked it
When you select a brand, the average is displayed if there are 5 or more responses.









