Smoking area near here

I tried to see if Marlboro and Heats can be smoked with Icos Ilma! Forced to smoke [backstage].

[Disappointing] I Tried Seeing If You Can Smoke Marlboro or HEETS in IQOS ILUMA! You Can, But... IQOS
IQOS IQOS Irma Difference IQOS Recycling Oasis Pearl Irma One 1980 yen Ruby MentholIncluding PR
⚡ 【早見表】旧マールボロ・ヒーツはIQOSイルマで吸える?互換性と絶対NGな理由
結論:そのままでは絶対に加熱不可IQOSイルマ(およびイルマ i)はスティック内部の金属片を磁力で加熱する「誘導加熱方式」のため、金属片がない旧マールボロ・ヒーツを挿しても反応しません。
金属片を移植する「裏技」は危険使用済みテリアから金属片(サセプター)を抜いて他銘柄に挿す行為は、異常過熱・発火や内部詰まりの原因となるため絶対に行わないでください。
現行の純正スティック価格イルマ専用「テリア(TEREA)」は1箱640円、旧ヒーツ後継の「センティア(SENTIA)」は1箱590円(すべて税込・2026年10月改定)です。

Good evening,Heated cigarette blogger Genki (@MOQLOG_JP)It is.

Honestly, is there any point in doing this? To be clear, it doesn't make any sense at all, but it's boring to reprint information from the official website every time and write lengthy articles, so I did something silly.

Zuhari!IQOS ILUMAindicates certainty, emphasis, etc.Marlboroand ... andHEETSLet's smoke the Story about.

As you know, Icos Ilma can only smoke TEREA or SENTIA, which are exclusive cigarettes, and conversely, Icos 3 series can only smoke Marlboro and HEETS.

However, after trying it, there is not a millimeter of benefit to smoking Marlboro or HEETS with Icos Ilma, so please don't imitate me guys!.

Why can't I smoke Marlboro and other brands in icos Ilma?

Icosylma SeriesandOld Icos 3 Series...Zero compatibility, although it is unavoidable due to the structure..

That said, with the loss of the familiar Icos blade, the Irma-specific Terriers and Sentias are now completely different from the traditional Icos 3-specific sticks.

The Terrier and Sentia sticks not only have a metal plate embedded in them, but also a filter on the tip, which means that if you try to force it in, the blade will surely die!.

So, if you try to use Irma's exclusive Terrier or Sentia with the old Icos 3 series, it is honestly a hassle because it takes a lot of time and effort.

However, I felt that if I knew the structure, or rather the heating mechanism, I could do it a little easier with Marlboro and Heats, which are specially designed for Icos3.

In addition, as I mentioned at the beginning of this article, I would like to reiterate that all Marlboro flavors are in TEREA, so to be clear, there is not a single millimeter of advantage to doing this!.

Mechanism of heating of Icosilma

The Icosilma is a very well thought out device, and itsHeating Technologyis "Smart Core Induction SystemThey call it "the.

By eliminating the blade, I wondered if Icos had given up on "direct heating of the tobacco leaf," which was one of its strengths,A metal plate that takes the place of the blade is embedded in the stick, which is then heated from the surrounding area, causing the built-in metal plate to heat up, directly heating the tobacco leaf.= So, the same taste and smoking experience as before was maintained without the blades.

Mechanism of heating of Icosilma

Whoever thought of this is really a genius!

To be honest, the blades made for a great smoking experience, but they also got dirty and snapped off, which was really great because they solved the problem without changing the smoking experience.

TEREA cigarette butt, the outer perimeter is not burnt at all.

Furthermore, there are no burn marks around the cigarette butts,The holder of the Icos Ilma only heats the inner metal plate.This is a good example of what we are talking about.

In other words, if I put a metal plate in Marlboro or HEETS, could it be smoked? I thought so.

Remove the metal plate from the cigarette butt and embed it in the Marlboro!

It would be a shame to disassemble a new tobacco stick, so I first disassembled the cigarette butt, took out the metal plate, and inserted it into the Marlboro.

On Irma. Marlboro Smoke the HEETS
  • STEP01
    Pull out the metal plate from the cigarette butt.

    Remove the filter at the tip and pull out the metal plate.

  • STEP02
    Make a hole for easy insertion.

    The metal plate was likely to bend if inserted as is, so I drilled a hole in it.

  • STEP03
    Metal plate embedded in Marlborough (I failed and it is HEETS)

    Push it in a little deeper and tighter because you don't want to scratch the bottom of the holder.

  • STEP04
    Insert it into an Icos Ilma and heat it up.

    HEETS, but I was able to heat it up just fine (laughs).

  • check
    Crack open a cigarette butt to check its condition.

    The outer perimeter is now bumpy, familiar to Irma's suckers.

Surprisingly, the metal plate of the cigarette butt heated without any problem.

It is only natural, since you can smoke twice if you give it a little time.

Metal plate removed from cigarette butt

The metal plate itself that was pulled out of the cigarette butt was not burnt at all, so no problem at all.

For the time being, it turns out that even Icos Ilma can be smoked in both Marlboro and HEETS as long as the metal plate is inserted.

Taste impression... To be honest, it's subtle.

People who have tried the Icos Ilma often say that it is lighter, but I have found that this is not due to the special cigarette, but to the construction of the holder!.

The same HEETS, however, can be enjoyed with a heavier draw and a firmer feel when smoked with the Icos 3,When you insert it into Irma, it's scuzzy... the taste is about 50% less..

When inserting the stick, a groove is made on the stick, which seems to facilitate air intake and made the stick very light.

Also, like when I emptied the vape.throatmouth turned down at the cornersThe stimulation came out in the second half, so maybe I burned something that shouldn't have been burned..

To confirm this, I would now like to compare the cigarette butts smoked in the Icos 3 with those smoked in the Icos Irma.

Cigarette Butt Comparison

The one on the left was smoked with Irma, and the one on the right was smoked with an Icos 3 Duo.

First, let's start with the appearance. As you can see, the one smoked with Irma has a bumpy surface where it is inserted.

Neither of them are charred on the outside, so they are definitely heated from the inside.

The left one smoked with Irma, the right one with Icos 3 Duo, slightly different burnt.

My throat got sore, probably because I burned the filter just above the tobacco leaf..

I pushed it in a little too far (sweat) because Terria and Sentia had blades stuck a little too far up.

As a result, even the filter on top of the tobacco leaf was burnt, and it is thought that it caused a sore throat....

Anything metal? No!

The cutter blade was close in size, so I tried it.

We decided to use one cutter blade after the other.

It is thick and hard, so I was able to insert it easily.

When I pressed the heating button, it worked a few times, which I expected, but after about three flashes, it said, "Something's not right!" After about three blinks, the heating was forced to terminate..

Maybe the material was not good enough because I tried three times and it did not work.

Then I thought about trying aluminum foil because it had a similar "squishy" feeling, but my wife scolded me, saying, "What if it catches fire? I was scolded by my wife, "What if it catches fire?

At the time of its launch, I had heard that icosilmers are like microwave ovens, and if that's really true, aluminum foil is super dangerous (sweat).

Aluminum foil x microwave oven = ignition, so everyone should definitely not do this.

So what is this piece of metal?

Upon further research, it appears that the official name is "susceptor," which is a three-layer structure consisting of a nickel alloy covered by two layers of stainless steel.

In order to generate heat by magnetic force, a metal that sticks to a magnet is necessary. Among stainless steels, there are some that stick to magnets and some that do not.

Magnetic stainless steel is used in the water around sinks and other appliances that we are all familiar with.

The plates used in this Terrier and Sentia are probably made of SUS430 series stainless steel, considering their price, workability, and magnetism.

Can I smoke Marlboro or HEETS with Icos Ilma? Summary

Conclusions,I found that I can smoke Marlboro and HEETS other than the dedicated cigarettes as long as I insert the metal plate, even in Icos Ilma!.

However, it is not worth doing at all because the smoking experience will be crazy light and you may burn strange things and generate unnecessary toxic substances!.

And as a layman, I don't know the detailed material,I would rather tell you that you should not do it, because of the risk of ignition or explosion, depending on the material..

It also turns out that not just any metal will work, at least not a cutter blade. Steel and stainless steel may look similar, but they are completely different.

I guess it means that dedicated cigarettes taste best when smoked with a dedicated device. Please do not imitate them, as we cannot be held responsible for any problems that may occur if you do.

postscript

I could smoke it, but it didn't taste good at all, and to be honest, it didn't feel like I just spent my time.

And this indescribable feeling of weakness... I have to go to bed.

Well, it is only on my personal blog that I can write about such trivial things, so I will leave it at that for today.

Have a good day, everyone.

How Was This Flavor?

Aggregates ratings in 1 click from users aged 20 or older who have actually used the selected brand. By pressing the button, you agree that you are 20 or older and that your response will be used for anonymous aggregation. Response counts are displayed from 5 or more. Options are limited to brands registered in the product master.

1 Did not suit me — 5 Liked it

When you select a brand, the average is displayed if there are 5 or more responses.

Also rate sweetness, menthol, etc.

Comment

en_USEnglish
Moclog is a blog about tobacco.
You are over 20 years old, correct?
No, sir.
🌐 English