Smoking area near here

A beginner vaper tried coil building! I don't know why it tastes so good when I vape with coils I wound myself.

A beginner vaper tried coil building! I don't know why it tastes so good when I vape with coils I wound myself. VAPE
2023.06.18
VAPE What is Icos? What is Plume? What is Glow? What is a vape?Including PR
⚡ 【早見表】VAPEの「コイルビルド（RBA）」を始めるメリット・必要工具と安全ルール
なぜ自分でコイルを巻く（ビルドする）と美味しいのか？自分の好きなワイヤー素材（カンタル・クラプトン等）とコットン量を調整でき、汚れたらコットンだけを取り替えて常に新品同様のクリアな味を1回あたり数円で維持できるためです。
初心者が最初に揃えるべき必須ツール①抵抗値を正確に測る「オームメーター（521 Tab等）」、②規定の内径（2.5mm/3.0mm）で綺麗に巻ける「コイルジグ」、③通電中も触れる「セラミックピンセット」、④精密ニッパーの4点です。
安全のための絶対ルール（ショート確認）コイルを取り付けたら必ずオームメーターまたはテクニカルMODで抵抗値（Ω）を確認し、キャップ内壁にコイルが接触（ショート）していないかチェックしてから使用してください。

Regarding Sales Information:Some product links in this article have been removed because the sales pages have ended. Prices reflect information at the time of publication.

This is my first attempt at a coil build!

Good evening,mocrogGen-chan, the caretakerです。 やっと時間がとれたので、待ちに待ったcoil buildChallenge toしましたよ。 今回のエントリーは、私のようにコイルビルドをしたことがない、Contents for beginner vapers who are curious about coil buildsとなっております。 ちなみに、ビルドを教えてくれたのはPINK VAPE PARTYで知り合いました."Poyo (Village Chief of Poyopoyo Village) @41REAL1Mr."、ありがとうございます！ 教えて頂いてから随分時間が経ってしまったので、うる覚えですが早速トライしていきたいと思います。

What is coil build?

What Is Coil Building
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
What do you mean by build?
Simply put, it's called winding the coils yourself.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Is it a homemade coil!
Clearos (clearomizers) use ready-made coils, right? Builds don't use ready-made coils, they use coils that you wind yourself, so the atomizer is a little different.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
I see, so I need a special atomizer for building. It seems like it would be very difficult, but can I make it?
Don't worry, you'll get used to it after making a couple of them, welcome to the vape swamp (lol)!
POINT ·Coil build is the process of building your ownWinding the coilを言い、そのコイルを使うには専用のアトマイザーが必要。 ・ちょっと難しそうだけど、やってみると案外簡単なので、まずはやってみる！これが大事。

What are the advantages of coil builds?

Benefits of Coil Building
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Wrap it up yourself...sounds like a hassle (sweat).
Yes, but there are also many advantages that only home-made products can offer!
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Is it a merit? Please tell us!
For example, cosmetics! The wires used in coil builds are just so cheap, and besides, you can decide the resistance yourself.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
It means that you can make coils of your choice at a reasonable price, doctor!
Yes, more than anything else, when I smoke with coils I wound myself, for some reason it tastes better!
POINT ·Coil building is a hassle, but it has a lot of advantages.、よりVAPEを楽しむならビルドなしでは語れない。 ・Coilraw materials, ,way of rollinganythingflavorand ... andResistance valuecan also be changedYou can make your very own coils from

What you need for coil build: Atomizer

RDA Dead Rabbit SQ
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
By the way, what kind of dedicated atomizer do you have?
I'm talking about atomizers called RBA (Rebuildable Atomizers), do you have one?
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Yes, I bought a few things. I bought a lot of things for now.
Beginners can easily start with single coils! Dual coils are more challenging.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
The only single coil one is... "Dead Rabbit SQ".
Hmm, an RDA, huh... Well, it has an easy-to-build deck, so that works! Let's try building on the "Dead Rabbit SQ"!
POINT ·RBA= (after a noun, adjective stem, onomatopoeic-mimetic word, etc.)radiuseBuildable AtomizerAbbreviations for,Generic name for build atomizers。 ・RDA= (after a noun, adjective stem, onomatopoeic-mimetic word, etc.)radiusebuildable Dripping Atomizeris an abbreviation for direct, tankless, as used in this project.Liquid drip typeのもの ・RTA= (after a noun, adjective stem, onomatopoeic-mimetic word, etc.)radiusebuildable tANK AtomizerAbbreviations for,Type with a tank among RBAsIf you are transitioning from a clearo, you may be more familiar with this one.

What you need to build coils: Build set

Geekvape Build Kit
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
I bought a set like this (Geekvape 521 Master Kit V3)...
Oh, you have a good one, this is OK because you have all the tools.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
I just don't know what it is because I've never used it (sweat).
Don't worry! We'll build with this tool, so learn how to use it together.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Thank you! But your build set is very compact!
Once you get used to it, you can substitute a lot of things for a little bit of everything, you just have to get used to this area.
[nlink url="https://moqlog.jp/vape/products-vape/geekvape-521-master-kit-v3/"]
POINT ·build setis equipped with all the necessary tools,beginnerit is precisely because ofrecommendation。 ・各道具をバラバラで揃えることも出来るけど、ケースなんかも付いているのでお得。 ・You can substitute a lot of different things as you get used to it.So, it seems that a lot of things become unnecessary.

What you need for coil build: Coils

Various Coil Wires
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
What kind of coils should I use?
I'm thinking Kanthal or stainless steel, 26 gauge or so, for the first time.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Doctor... I don't understand (tears).
Kanthal and stainless steel refer to the material, and 26 gauge refers to the thickness of the wire.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
I have a Kanthal A1 26ga 15ft from Geekvape, is this ok?
The Kanthal part means Kanthal material, 26ga means 26 gauge, and 15ft means about 5m length of wire.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Speaking of which, coils don't cost much more than ready-made ones, but which ones are cosmetically superior?
The price may be about the same, but the coils used in the build are super affordable because you can make about 50 coils for the price of one!
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
The ready-made product only contains 5 pieces, but if you build it, you can make 10 times as many? That's very reasonable!
Not only can you make coils with your original settings, but they are also cosmetically pleasing! That's why I can't quit building.
POINT The beginner is,Kanthal or stainless steel wire of around 26 gaugeを買いましょう。 ・Material type,Ka(in Japanese history)(Kanthal)in addition tosuspended solids(in Japanese history)stainless steelandNi80(in Japanese history)Nichrome(See Section 2.1.2.),Ni200/Ni80(in Japanese history)nickel (Ni))などがある。 ・Gauge is,20 gauge(in Japanese history)0.8mmFrom.32 gauge(in Japanese history)0.2mm)There are up toThe larger the number, the thinner the wire = higher resistance, and the smaller the number, the thicker the wire = lower resistance.becomes.

For coil builds, you will need: Cotton

Geekvape Cotton Balls
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Doctor, I also bought some cotton!
Oops, I bought this one... (sweat)
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Was "Geekvape Cotton balls" bad?
Sorry, sorry, it's not bad, but it's rather expensive for a vape-specific cotton, you can use cosmetic cotton, and the cheapest ones can be from a 100 yen store.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Cotton can also be used for cosmetic cotton (sweat).
It's not that I have to use something specific for vape, if anything, cosmetic cotton is more cost-effective.
POINT ·cottonschool (e.g. of ikebana)VAPE ONLYIt does not have to be from。 ・資生堂さんの「クレドポー・ル・コトン」、あとは無印良品のコットンなんかは人気とのこと。 ・Cotton from a 100 yen store can also be used.So, if price is important, it is an option.

Coil build, let's do it!

black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
First, try to cut the coil about 10 cm, and then cut it with the nippers in the set...and so on.
Geekvape Kanthal A1 26ga 15ft
Cut the wire to about 10cm
POINT It does not matter if it is too long, so it is best to cut it long at first.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
After cutting it, put it in the hole of the coil jig...and spin it around! For now, I did it with a 2.5mm bore this time.
Coil Jig
Thread the wire through
POINT You can choose from 2.0mm to 3.5mm bore diameters. The larger the diameter, the higher the resistance.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Take it easy, this time 8 windings, once the coil is removed and the excess wire is cut.
Wrap the coil 8 times
Cut off the excess wire
POINT The number of times it is wound changes the resistance, but the more times it is wound, the higher the resistance.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
The coil is mounted on the deck! It seems to be able to be inserted by loosening the minus screw next to the pole.
Loosen the screw holes on the deck
Mount the coil onto the deck
POINT The wires may pop out when attached to the deck, but if this happens, just cut off the amount that pops out and you are good to go.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Now let's fine-tune with an ohmmeter and do the long-awaited quenching (dry burn).
Set the deck onto the ohm meter
dry burn
POINT Note that the coil can burn out if it is not heated a little at a time.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Unevenness (hot spot) is created in the area that turns red when heated, and this is adjusted with ceramic tweezers or the like to make it uniform.
Tweezers
Dry burn complete
POINT It is said that you can lightly gouge the coil laterally or pinch it a little with tweezers.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Once the coil is complete, the next step is wicking! Take out one cotton and cut it at the appropriate thickness.
Cotton ball
Unrolled and cut into 1 piece
POINT Carefully unwind the ball into a single piece of cotton, which is then torn into single pieces by hand.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
After twisting the end of the cotton into a thin piece and threading it through the coil, cut it a little longer than the bottom of the deck and stuff the end inside...
Cotton threaded through the coil
Trim both ends of the cotton
POINT After cutting both ends, it is said that if you use tweezers or other tools to slightly penetrate the liquid, it will be absorbed better.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Let's drip some liquid on the cotton when it's done. If it's done so far, it's almost done!
Drip e-liquid
Cotton nicely saturated with e-liquid
POINT When dripping liquid, the key is not to push it in but to let it soak up the droplets.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Once the liquid has soaked in, press the fire button again! Once the mist comes out, the build is complete.
Coil build complete
POINT Unlike the tank type, the amount of liquid is far less, so be careful not to press the fire button too hard or you may run out of liquid and burn yourself.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
Put on the sleeve and top cap and your RDA setup is complete! It's done!
Dead Rabbit SQ complete
POINT Be sure to turn off the ohmmeter when removing the deck or doing any work that requires sleeving.
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
I tried to measure the resistance... 1.07 ohm... I wanted to wind a coil of about 0.5 ohm, but as expected, this is what happens when you wind it properly (sweat).
Resistance is 1.07Ω
POINT I found a site called Coiltoy that calculates the resistance, and according to this, I can make 0.5 ohm with about 4 rolls.

Coil Build Impressions

Thoughts on the Build If you simply want to make a coil, it was easier than I thought it would be with the build set.。 ただ、上手に作るとなると別問題で、素材による違いや巻き方にも種類があるので、まだまだ勉強が必要ですね。 初ビルドということで、ブサイクなコイルとウィッキングだったかも知れませんが、It's a wonder it tastes better than usual.です（笑） これからビルドに挑戦しようと思っている方、私でも出来ましたよー、是非やってみてください！ また、今回説明を省いたRBAの話やビルドセットなどについても書きたいと思いますので、もう暫くお待ち下さい。
black soybean sprouts fried in sesame seed oil wrapped in dried beancurd and stewed
I was not able to adjust the coils to my liking, but it is still very special to smoke with coils that I wound myself!
Things used in this build 1. Atomizer:Sales Page Ended 2.ビルドセット：Geekvape 521 Master Kit V3 / 7,980円 3.コイル：Sales Page Ended 4. Cotton: Geekvape Cotton balls / 820 yen *Build set sold out and no longer in stock (sweat)
Resistance check site:http://coiltoy.ermeso.com/

postscript

In this entry.."Poyo (Village Chief of Poyopoyo Village) @41REAL1"threeに大活躍頂きました、お酒が入っているにも関わらず色々教えて頂き、ありがとうございました。 ぽよさんから教えて頂いたことの10分1くらいは実践できたと思うのですが、色々忘れちゃってるかもしれません、あとで怒られそうだ（汗） また、この場を借りて素敵な出会いを作ってくれた."PINK VAPE PARTYMr. Kotaro of "Theにもお礼を言いたいです。 VAPERの方々は皆優しい方ばかりで、教えてください！っていうとホントに教えてくれるんですよね。 VAPE人口が少しづつ増えているのは、こういう人達がいるからなんだなーと、改めて思いました。 長文駄文にお付き合い頂きありがとうございました、今後とも宜しくお願い致しますm(_ _)m

Comment

  1. おっさんの挑戦状 says:
    2018年3月13日 at 12:36 AM

    Thanks for your time.
    I still only have a distorted build....

    Reply
    • げんちゃん says:
      2018年3月14日 at 12:32 AM

      Mr. Challenge.

      Good evening, this is the first time I've really rolled one myself, so I'm embarrassed to say that I'm not yet at a level where I can show it to others (sweat).

      I was surprised, though, that even the coils I wound tasted good.

      I'm worried that I'm going to be addicted to vaping (-_-;)

      Reply
en_USEnglish
ja日本語 zh_CN简体中文 zh_TW繁體中文 ko_KR한국어 fr_FRFrançais es_ESEspañol de_DEDeutsch pt_BRPortuguês do Brasil it_ITItaliano id_IDBahasa Indonesia thไทย viTiếng Việt arالعربية hi_INहिन्दी ru_RUРусский en_USEnglish
Moclog is a blog about tobacco.
You are over 20 years old, correct?
No, sir.
🌐 English