Smoking area near here

Can the cartridge regeneration and the standard cold-heated cigarette backstage technique be done with glo sens?

Can the cartridge regeneration and the standard cold-heated cigarette backstage technique be done with glo sens? glo
glo glo Rajkisto glo cool gloAir glo Kent glo convenience storeIncluding PR

2026-10-1 price revision: list by brand and annual cost difference

⚡ 【早見表】低温加熱式カートリッジのリキッド補充(再生)手順と現行デバイス移行ガイド
カートリッジ再生の仕組みたばこカプセルやポッドが余った際、空になったカートリッジに市販の無香料VAPEリキッド(VG/PG)を数滴補充して再利用する節約手法です。
液漏れ・故障リスクに注意パッキンを外したカートリッジは密閉性が落ちるため、液漏れによるバッテリー端子のショートや通電不良が起きやすく、あくまで自己責任となります。
現行モデルでの対策旧glo sensは終売していますが、現行の「ウィズ2(with 2)」なら純正のパフカウントリセットとゆっくり深吸いするコツでカプセル余りを防げます。
おはようございます、モクログ管理人のげんちゃんです。 今日は久しぶりにローラーブレードなどをしに公園に行くことになっているので、朝から書き始めています。 子供がね・・・家にいても暇だー!とうるさいんですよ。 私も最近走れていないので、ちょっとした運動だと思って行ってきますよ。 さて、今回のエントリーですが、November.Nationwide sales fromIt is rumored thatglowsenseIn,staple (of a situation, of a fiction genre, etc.)のexception operationWe verified whether the use ofので共有します。 グローセンスに興味を持たれている方は、是非参考にしてください。

Standard back-up for cold-heated cigarettes

低温加熱式タバコと言えば「プルームテック」を想像される方が多いと思いますが、カートリッジに含まれるリキッドが少ないため、リキッドはなくなってしまったのに「たばこカプセル」だけが余る事態が頻発。 色々と原因はあるものの、たばこカプセルだけでは使えないので、カートリッジを復活させる必要があったんです。 そこで考案されたのが."Cartridge regeneration"という裏技で、簡単に言うとカートリッジ内で空になったリキッドを再補充する方法のことです。 プルームテック・プラスでも可能なので、今度発売されるグローセンスでも出来るんじゃないか?これが今日のテーマなんです。 [nlink url=”https://moqlog.jp/ploomtech/info-ploomtech/enjoy-plus/”] Space [nlink url="https://moqlog.jp/ploomtech/products-ploomtech/recycle/"] Space

Glow sense cartridges

Top of the glo sens cartridge Tank section of the glo sens cartridge グローセンスのカートリッジを見ると、なんとなく構造は予想出来ます。 まず驚くのが、VAPEのRDAなどと同じように、上から覗くとコイルが丸見えです。 (I can't rebuild it, so I'm talking about looks) コイルにはウィッグのようなものも確認できますので、まったく同じ構造です。 吸い方にも寄りますが、It is said that 15 puffs require about 0.1 ml of liquid, so a GlowSense cartridge contains about 180 puffs = 1.2 ml of liquid!と予想されます。 見た目的にも結構深さのある構造なので、この下の部分にちょっとしたタンクのようなスペースがあり、そこにリキッドが入っているんでしょう。 ですので、これはRDAというよりはRDTAに近い構造をしているんだと思います。

Two patterns of liquid refill

Even the coils and wigs are out of tube,Dripping and refilling liquid as it is like an RDAするのが一番シンプルで簡単な方法のように思えます。 ですが、逆さまにしたときにリキッドが垂れてこないか心配なので、もう1つの方法についても探ってみました。 それはHow to pour liquid into a tank, like a liquid-filled podです。 多少分解できれば「ココがリキッド注入口だ!」という場所が見つかると思うので、そっちをメインに紹介します。

Remove the bottom plate of the flavor collar

Removing the flavor-colored bottom plate 1 Removing the flavor-colored bottom plate 2 グローセンスのカートリッジはプラスチックで全体が造形されているので、外せるところなんて底しかありません。 「底」というのは、フレーバーごとに色がついている板のようなパーツで、よく見ると爪で止めているだけに見えます。 これをマイナスドライバーを使って外してみました。 無理やり引っこ抜こうとすると、爪を引っ掛ける部分が折れますので気をつけてください。

Found an inlet at the bottom.

Found the fill port on the bottom 1 Found the fill port on the bottom 2 底を外すと、中には白地のプラスチックパーツが出てきました。 両脇に穴が空いており、中心部分は通電用の金属製プレートが。 充填型のポッド型VAPEを使ったことがある方ならお解りかと思いますが、この両脇の穴がまさにタンクに繋がる注入口ですね。 薄いシリコンで漏れにくいように加工されていますので、これをめくって出来た穴にリキッドを入れてみました。 溢れないようにゆっくりと入れていき、1mlほど補充したところで、シリコンを戻し、底をはめ込んで完成です。

Cartridge regeneration" succeeded!

Cartridge regeneration" succeeded! リキッドがウィッグに染み込むまで少し置いて吸ってみました。 私が今回再生に使ったのは「MELLOW BLEND」と言ってタバコ味系のフレーバーです。 これに小江戸さんの「セックスオンザビーチ(自作ニコチンソルト入り)」で補充、ちゃんとセックスオンザビーチになってました。 Delicious!It is properly sex-on-the-beach! The "cartridge regeneration" was a success for the time being, as there is no liquid leakage from the bottom, probably due to the good construction.

Refill from the top like an RDA

Refill from the top like an RDA RDAなんかは直接コイルやウィッグにリキッドを垂らしますが、同じようにコイルなどが丸見えなので、これでもイケるのでは?と試してみました。 やり方は簡単で、Just drip the liquid over the top.。 ここで心配なのは、タンク内にうまくリキッドが染み込まず、逆さまにしたらリキッドが垂れてきた・・・という事態。 リキッドを垂らしたあと、5分ほど放置してから逆さまにして置いてみました。

This is still good, but...

Slight leaking 結論から言うと、コレでもカートリッジ再生はいけちゃいました。 全然吸えるので、This is enough for troublesome situations or when you want to revive it a bit.です。 ただし、横にあるキャップを見てください。 やはり補充したリキッドが垂れてきているのは間違いないので、もし上部から補充するのであれば、I recommend putting on the caps that come with the cigarette pods when you buy them..

postscript

コイルも見えるし、内部の構造も調べてみたかったのですが、底を外したときに見えた白地のパーツが取り外せなかったんですよ。 でも上手くバラすことができれば、リビルドもできちゃうかも。 今回補充したリキッドがなくなったら更に分解してみようと思っていますので、興味のある方はまだ覗きに来てくださいねー(*´ω`*)

How Was This Flavor?

Aggregates ratings in 1 click from users aged 20 or older who have actually used the selected brand. By pressing the button, you agree that you are 20 or older and that your response will be used for anonymous aggregation. Response counts are displayed from 5 or more. Options are limited to brands registered in the product master.

1 Did not suit me — 5 Liked it

When you select a brand, the average is displayed if there are 5 or more responses.

Also rate sweetness, menthol, etc.

Comment

  1. BATJ says:

    When I play it back, it blinks white.
    Are you sure you can play it back?

    • げんちゃん says:

      Hi, were you unable to regenerate the cartridge?

      Hmmm, I don't know why, it worked perfectly fine when I did it, but the white blinking means that I put in liquid and it indicates replacement.

      I am sorry, but I don't know the cause, I will try again next time.

      I'll post an article if I find out anything.

      Thank you for your comment!

    • i-bouzu says:

      I came across this site under "Glow Sense Refill."
      I too had given up after repeatedly removing the cover, injecting liquid, white blinking, and so on, but then it occurred to me.
      That is... "too much liquid was injected".
      To try it out, I sucked out all the liquid from the white flashing pot with a syringe (purchased on Amazon for Plumtec regeneration) and again injected 1-2 ml.
      When I smoked it to try it out, it stopped flashing white!
      The pods have a capacity of about 10-12 ml, and until now I have been adding liquid until just before it leaks.
      Is it because when the inside of the pod was filled with liquid solution, there was no more space for the liquid to evaporate? I imagine that this is the case.
      I don't know why, but it seems that white flashing can be avoided by injecting the right amount.

      • げんちゃん says:

        i-bouzu3

        Good evening and thank you for your comments.
        I see...you mean that if you put too much in, it may cause white flashing....
        And I didn't realize the pod capacity was such a large space (sweat).
        Thank you for sharing your valuable story!
        I'll include this as a note in the relevant article next time!

  2. GENKI says:

    I was able to play it back for reference.
    I had a liquid that I liked.
    Just...I did both from the top and the bottom myself,
    Be careful not to put too much in from the top, or it will leak out~~~sweat

    Maybe it has nothing to do with Gen-chan's opinion? I don't know.
    If the coil dies, maybe it can't be regenerated? Yes.

    • げんちゃん says:

      Mr. GENKI.

      Good evening and thank you for your comments!
      I knew it would leak from the top (sweat).
      It seems best to refill the tank from below.
      I thought about winding it up when the coil dies,
      It looks like it needs to be disassembled further, so it would be easier to buy a new one (laughs).
      Glad I could be of service!
      We look forward to working with you in the future. m(_ _)m

      • GENKI says:

        Excuse me again.
        This doesn't react with viscous liquids.
        There are times when you may have to go to ・・・・. The out of liquid sign is shown.

        The trick is to mix the liquid with the liquid that is in the beginning to some extent.

        • げんちゃん says:

          Mr. GENKI.

          Oh, I see!
          Liquid regeneration is not so straightforward!
          Next time I will disassemble one to see the structure, please take a peek again!
          Thank you for all your valuable information.

en_USEnglish
Moclog is a blog about tobacco.
You are over 20 years old, correct?
No, sir.
🌐 English