CTHULHU RBA AIO BOX Review! It's been a while since I read the manual seriously (sweat) This is an RBA AIO for intermediate users.

Regarding Sales Information at the Time of Publication:Some products and campaigns introduced in this article have now ended. Prices and availability reflect information at the time of publication.

Hello,Heated cigarette blogger Genki (@MOQLOG_JP)It is.

My son is at his last club game of the year today, and according to the preliminary report, he went on to win well and was in the top 8 and confirmed for the prefectural tournament.

I immediately made reservations for sushi to go around and began writing in a hurry to celebrate today.

modern timesreviewHe writes, "CTHULHU RBA AIO BOXIt's been a long time since I've been here.IntermediateI can't figure out how to use it just by looking at it.

So, today I have read the manual thoroughly, so what kind of product is it and how to use it? I would like to review that.

CTHULHU RBA AIO BOX Review!

The manufacturer, CTHULHU, has a logo that looks like an octopus, which has a strong impact.

The point of this product is that it's a high-end AIO BilletBox standard BORO tank starter.

BilletBox costs tens of thousands of yen, so I can't afford it,Just the right unit for a high-end experience!.

However, please note that this is not a good choice for vape beginners, so please do not choose it as your first vape.

specification

brand	CTHULHU (Cthulhu)
Product name	CTHULHU RBA AIO BOX (Cthulhu RBA A.I.O.)
Size	80 mm 48.2 mm 22.8 mm
weight	112g (without battery)
battery	18650 single
Output range	5 - 60 W 1.0 - 8.0 V
mode (musical mode, mode of probability distribution, state of physical system)	VW, VV, TC, TDR, BYPASS
Liquid capacity	6.0 ml

The size is quite compact, and you can choose from a variety of output modes, including wattage, voltage, temperature control, and bypass..

It's been a while since I've needed a 18650 device, so I've been rummaging around for one.

I have never used the original BORO tank, so I don't have a clear idea, but I heard that the included tank is perfectly compatible and has a great taste and perfection.

BilletBox compatible devices are also sold by ASPIRE and others.

Minimum required knowledge, experience and things

I will describe the knowledge and experience that may be necessary to handle this CTHULHU RBA AIO BOX.

• Build knowledge and experience
• What you need for the build (wire, cotton, etc.)
• Battery Knowledge
• Battery 18650 (included at the store we are introducing today)
• Read the instructions.

In the meantime, I heard that ASPIRE's Nautilus coils can be used, but this review assumes that you build them, so it's hard if you've never built one before.

Also, although batteries are included, it is better to have some knowledge of Ohm's law and batteries, just in case.

Lastly, be sure to read the instruction manual properly. This is not like pod vapes, which are so common these days, and it is dangerous to touch them without any knowledge at all.

Once you get used to it, you can enjoy this kind of customization

I think all the boring stories will make you wilt, so I have included some photos of users that I found on the manufacturer's website.

The CTHULHU RBA AIO BOX has removable front and rear panels, allowing for this kind of customization..

If I could use a 3D printer or something, I could probably make it myself, but I've given up on that, so I'm thinking about making my own stickers.

Some people made and sold their own panels, so you can do a lot with your ideas.

Package and Set Contents

There were so many small parts that I stopped taking pictures, but this is the first time I have seen an airflow pin.

The conversion adapter for Nautilus coils will not be explained since we do not have any Nautilus coils on hand to begin with.

I feel like I haven't touched a vape in a long time.

CTHULHU RBA AIO BOX Body

When the panel on the octopus mark side is removed, the rumored BORO compatible CM tank appears.

It is cute that there is a little octopus mark.

When the panel on the fire button side is removed, there is space for an 18650 battery.

The other button is very small, but it has an LCD, and an even smaller button (green) below it is the plus/minus button.

CM tank (from removal to build)

1. Remove the drip tip.

To remove the tank, the drip tip base must be removed from the drip tip, so remove it from the drip tip first.

By the way, the drip tip is 510, so you can buy a lot of things to play with.

2. Remove the pedestal.

Note that this pedestal seems to press the tank from above and hold it in place, so if you try to forcibly remove the tank without removing this pedestal, you may damage it!

The pedestal has grooves at the top and bottom, so you can remove it by spinning it with a coin.

3. Take out the tank.

The tank can be easily removed by removing the pedestal.

The tank is then disassembled.

4. Tank disassembly

The tank is made up of six parts in total and has a small, but single deck.

The gear-like thing is for adjusting airflow.

5. Build

I wrapped it around with SS24ga without thinking.

I can't check it with an ohmmeter as it is on this deck,When hardening, it is convenient to use an adapter..

6. cotton

Cotton should hang down a little through the hole in the deck..

The cotton that sticks out sucks up the liquid.

7. Set of chamber, etc.

Once the chamber, tank, and airflow rings are back in place, all that is left is to add liquid.

There is one point to note at this point, so please check the following.

Tip: Note the orientation of the bottom of the tank!

I think there are "arrows" on both ends of the bottom of the tank, and you have to set it down with the logo facing you..

Note that if the orientation is wrong, the connection position of the contact pins will be misaligned.

Supplemental: Airflow insert pin

They can squeeze the draw by connecting to a contact pin.

I could have smoked without it, but I decided to install the largest 2.0mm one.

8. Liquid charge

The recharger can be removed from the main unit or attached to the main unit.

Simply remove the packing on the octopus mark side and tuttle it in.

9. Battery installation

When the battery is inserted, the LCD displays the resistance or wattage.

I think it was about 0.3 ohms, but I decided to try it at 0.25 ohms and 40W.

I'm going to smoke OHMBOY's TROPICAL.

I just wrote a review yesterday, and since there was still some left, I thought it would be a good choice for a smoking comparison.

Well, the draw is exquisite thanks to the insert pin, but the build is so poorly done that it doesn't taste very good (lol).

What the heck...,I think vape can be tasty or tasteless depending on the build, so I think this is a good idea..

I rather enjoyed the process so far, so that's good!

How to use CTHULHU RBA AIO BOX

Power ON/OFFClick the fire button five times.
Change OutputAdjustment by plus/minus buttons inside the panel
mode switchingAfter clicking the fire button three times, use the plus/minus buttons to switch.
P：Wattage → V：Voltage → B：Bypass → Ni：Nickel → SS (Stainless Steel) → Ti (Titanium) → TCR：Temperature Control
Light ON/OFFSwitching by simultaneously pressing the fire button and the plus button

The instructions are in odd Japanese, but the level of detail is readable, which is helpful.

The basic usage is not so different from that of a standard technical mod..

The deck is too small to build, the bottom of the tank has to be oriented carefully, and the fire button design is not great... I guess that's about all I cared about.

A Nautilus coil might have tasted good, but there was none, so I had no choice.

CTHULHU RBA AIO BOX Sales Information

There are four colors in total: elegant black, midnight green, Pacific blue, and hot pink.

The designs are all nice and simple, but the prices are not so good.

However, it is important to point out that the 18650 battery is included, and it is a hassle just to choose this one, so if it comes with one proper battery, well, maybe this is the price!.

You can buy it on the official store website or on Rakuten, whichever you prefer.

postscript

I thought again with the development that I didn't expect it to be tasty, but I guess pre-made coils don't come off!

I thought maybe clearo x pre-made coils would be better for someone like me.............................

Well, I'm going to get ready to go see-saw (go around), so I'll leave it at that for today!