Smoking area near here

In-depth review of the highly acclaimed and delicious Plumtec Plus! Don't let anyone tell you it's light!

【100点満点】プルームテック・プラスが想像以上にパワーアップしてる!使い方やスペックの詳細レビュー Ploom
Ploom PloomX Review PloomX980 yen PloomX Mobius PloomX Camel PloomX CouponIncluding PR
⚡ 【早見表】プルーム・テック・プラスの味評価と現行後継機「ウィズ2(with 2)」への移行
初代プルーム・テックからの進化点加熱温度を約30℃から約40℃へ引き上げ、リキッドとたばこ葉を増量したことで「無臭のまま吸いごたえが大幅アップした」と高く評価されたモデルです。
現在は「ウィズ2(with 2)」が現行機旧プルーム・テック・プラス本体は販売終了し、現在は同じ「メビウス・たばこカプセル」がそのまま使えて蒸気量を1.3倍にできる「with 2」へ進化しています。
室内・車内用に最強のサブ機高温加熱式(IQOSやPloom AURA)と違い、火災リスクもタバコ臭もほぼゼロのため、自宅の部屋や車内で吸う専用機として根強い人気があります。

Hello,Heated cigarette blogger Genki (@MOQLOG_JP)It is.

I had received a sample of the "Plumtec Plus" at JT's new product unveiling, but it was far better than I had expected, so I didn't write about it until today, when I decided to get into it.

Online sales began at 12:00 pm today, and those who were able to make a store reservation on the 25th are about to pick up their tickets.

As of 2021, the successor to the Plus, the Plumtec Plus With, is now available. For more information, please refer to the article linked below.

What is Plumtec Plus?

Plumtec Plus is, as it reads.Ploom TECHIn "The.feel of something absorbed (e.g. a feeling of coolness, freshness, crispiness, etc.)to "plus"I did, the PlumTec'shost devicesomething serious.

In terms of category, it is classified as a "low-temperature heated cigarette" like Plumtec, and is used with a cigarette capsule attached to the tip.

The base product is the "Logic Pro" e-cigarette by the American e-cigarette manufacturer Logic, which we introduced earlier, so the design looks much like an e-cigarette.

When I tried Logic Pro, I was under the impression that it was not very promising...but it turned out to be a complete 180.

In this review, we will discuss three points: the increased power of the Plumetech Plus, a product review, and how to use the product.

Plumtec Plus is a major boost in satisfaction!

electronic cigarette(Plumtec)(degree of) satisfactionThe two ways to measure theindicatorI believe there are.

First of all, the amount of vapor exhaled from the mouth when inhaled... It is a matter of feeling, but the greater this amount, the more satisfying the inhale will be.

Many people find satisfaction in the amount of vapor, as the term "smoke bomb" suggests.

Next is the strength of the kick, which refers to the irritation that comes gurgling down your throat when you smoke a cigarette.

Since PlumeTec is only a "cigarette", the strength of this kick is important.

Conventional PlumTecs are weak in exactly these two areas, which is why some people find them insufficiently satisfying.

Two indicators of satisfaction

1. vapor volume
2. kick (throat gulping stimulus)

Steam volume is powered up!

Steam volume is powered up!

PlumTecs have produced a modest amount of vapor, but it was not as much as the vapes of the world.

What we set out to do was to create a "real vape" base with a battery that can be operated at high output.

You can tell when you smoke it, but it's roughly 2 or 3 times more than a Plum Tec.Steam volumeにmaking more powerfulI do..

I was not told the resistance of the cartridge for the Plumtec Plus, but my sense is that it is around 1.5 ohms.

The conventional PlumTec was 3.0 ohms, so it makes sense that it produces nearly twice as much vapor.

The kicks are so much more powerful!

The kicks are so much more powerful!

I assumed the steam volume would increase when I heard the plus would be produced,kickI was amazed at the significant improvement in.

It's very hard to improve the kick, especially for PlumTec, and to put it simply, you have to improve your nicotine and other intake.

This means that the cigarette capsule itself needed to be powered up, as improving vapor volume alone would not change it.

As one would expect from a leading Japanese company, they have developed a cigarette capsule exclusively for the Plumtec Plus.

I would have thought that JT would not go that far since it must cost a lot to make a dedicated cigarette capsule, but JT's seriousness is evident in this part of the product.

Devices to increase the kick of Plumtec Plus

Devices to increase the kick of Plumtec Plus

There are two differences from the cigarette capsule for Plumtec.

It is in the "amount" of tobacco leaf (grain) in the capsule and the "temperature" when it passes through the capsule!.

In order to trap more ingredients (nicotine, etc.) in the capsule, the amount of "tobacco leaf (granules)" is increased, and at the same time, the temperature of the vapor passing through the capsule is increased so that the ingredients can be more easily absorbed.

For example, only one component could be adsorbed in one part of the vapor, but this device allows two or three components to be adsorbed, resulting in a "gulp" kick that can be felt even though it is an e-cigarette.

As I mentioned when I spoke with JT before, the innovation of the PlumTec is in the "cigarette capsule"...the cigarette capsule played an important role in the Plus as well.

Power-up satisfaction summary

Power-up satisfaction summary

PlumeTec Plus has successfully improved the satisfaction that was the bottleneck with the traditional PlumeTec.

It's just the way I smoked it,nicotineI'm sure the quantity is increasing..
*The nicotine amount has been published for your reference.

Since the basic structure is the same as that of Plumtec, I have a feeling that it will grow in the future since the benefits of the 99% cut of toxic substances have been increased in satisfaction without any change.

As for the smell, the official website says 1%, but the higher vapor volume makes it easier to feel, so if you think this point is the same as Plumtec, you might think, "It smells! You may think "It smells like Plumtec!

However, there is no smell when heated like Icos, Glow, or Plume-es, so you should be able to smell a little more than Plume-tech....

I felt the impact of the Plume S more than the Plume Tech, just because the comparison was Plume Tech! I recommend it.

Plumtec Plus Concerned Product Review

In this section, we will review the Plumtec Plus, which no longer looks like a vape itself.

I am deeply moved to think that JT is finally selling vape, but I am concerned about the quality.

Please refer to the following page for more photos.

vanity case

Outer Box Part One
Outer Box Part Two

Plume S was also different, but Plus also has a cosmetic box with a cylinder-like design.

When the paper around the cosmetic box is removed and the box is opened in the center, each part is stored as if it were stuck in the box.

Set Contents

Package Contents ①

Main unit (battery, cartridge cover), AC charger, USB cable, manual, and warranty card.

The capsule holder is attached to the cartridge cover.

battery

Battery 1
Battery 2
バッテリーその3

There is a power button on the logo side, and the model number "PT+1.08L" and battery capacity "610mAh" and wattage "2.26Wh" on the back.

The connection to the cartridge cover is like a four-pawl fit.

Cartridge cover

カートリッジカバーその1
カートリッジカバーその2

The cartridge cover has two small windows at the front and rear and is tubular.

The connection was secured with a "click" sound when the claw was turned.

capsule holder

カプセルホルダーその1
カプセルホルダーその2

It is not compatible with drip tips for vapes and other products, as it also serves as a lid for the cartridge.

The vapor generated by the cartridge is sucked in through a hole in the center and poured into the capsule.

assembly

組み立てその1
組み立てその2"

I set the cartridge cover and capsule holder on the battery.

At a quick glance, it is no longer anything but a vape.

Cigarette capsule (box)

たばこカプセル(箱)その1
たばこカプセル(箱)その2

Included in the package are the familiar "cigarette capsule" and "cartridge," but the cartridge is a little different.

Instead of the previous stainless steel/black cartridge, it is now a transparent tube.

tobacco capsule

たばこカプセルその1
たばこカプセルその2

It looks the same as the previous cigarette capsules...by the way, I opened a "MILD BLEND".

The filter is oddly brown, but there seems to be little change in appearance.

cartridge

カートリッジその1
カートリッジその2
カートリッジその3

It uses the same pod-shaped cartridge as the Logic Pro, with the equivalent of five cigarette capsules of liquid inside.

It is a clearomizer coil and tank in one, as in a vape, with the top and bottom caps removed.

Incidentally, the hole in the center serves as a path for the generated steam.

Cartridge installation procedure

カートリッジカバーをセット
カートリッジを挿入
カプセルホルダーをセット
  • STEP 1
    Set the cartridge cover on the battery
    You will notice that the connection has a claw on the battery side, but if the small window is at the top, it is perfect.
  • STEP2
    Insert the cartridge with the metal part facing down
    There is a claw on the battery part that must be aligned with the concave part of the cartridge to energize it, so you can adjust it by turning the top part with your finger.
  • STEP 3
    Cover with capsule holder and you are done!
    The capsule holder cannot be attached if it is not well fitted into the battery claw, so please be careful not to screw it in forcibly.

Please note that depending on the orientation of the cartridge (sideways rotation), it may end up on the nail. This is an area we would like to see improved.

PloomTECH+ Specifications List

Product namePlumtec Plus
PloomTECH+
selling price4,980 yen
categorycold-heated cigarette
personal use tobaccoCigarette capsule for Plumetec Plus
SizeHeight: 140.9mm
Diameter: 15.0mm
weight40g
batterylithium-ion battery
capacity610mAh
Rated voltage5V
Rated current1.5A
Charging time90 minutes

I smoked a Plumtec Plus (how to use)

Many of you may have imagined a ticking like a vape from this shape.

While the ticker is certainly employed, it has been designed to make it easier for Plumtec users to get used to it, and we will introduce it as well.

electronic cigaretteIf you are accustomed to the "I", you may be puzzled by the opposite,JTAccording to Mr,Existing user perspectiveThey decided on this specification in.

Some operations are a bit special, so please refer to them if you are planning to buy one! Please refer to this page if you are interested.

First, turn on the power

Power ON

After loading the cartridge and cigarette capsule, quickly press the power button three times, click, click, click....

The outer circumference of the button will then glow blue, and the power is now turned on.

I'm gonna smoke it.

I'm gonna smoke it.

Unusually for this type of device, it uses the same "automatic suction system" as the Plumtec.

I feel JT's love for its users in this area!

Sign for 50 puffs exchange

Sign for 50 puffs exchange

When 50 puffs are smoked, the button flashes 40 times around the button as a sign that the cigarette capsule needs to be replaced.

During this 40-second period, no vapor is produced when inhaled, as before.

Reset Exchange Signature

Reset Exchange Signature

While the replacement sign was flashing, I had to do a "reset".

Simply press and hold the button while it is blinking, but be aware that you can only do this while it is blinking and that if you do not do this, you will not be able to smoke.
*In the unlikely event that you forget, just suck it in and blink it once, then do the same.

Power off

Power off

With vapes, turning on and off is often the same operation, but with the Plumtec Plus, a long press of the button turns off the power.

The system automatically turns off after 6 minutes of inactivity, so it seems rather good to remember the action of turning it on.

Impressions of MILD BLEND

My memory is a little hazy, but according to JT, "MILD BLENDThe "ƒ" is apowdered green tea (steamed and dried before being stone-ground)のfragranceI was told that it contains.

So, when you take out the capsule, you can smell a nice aroma.

The matcha is not present, but there is no unpleasant aroma at all, and the kick that comes with it is very strong.

It's hard to taste the kick, especially if you're running a vape with domestic liquids, so in that sense, the "Plus Exclusive Tobacco Capsule" is worth a try.

Please refer to the article linked below for all Plumtec Plus flavors and reviews.

Plumtec Plus Summary

The Plumtec Plus was the least expected of the new releases, but I was surprised at how well it did, even more so than the Plum Es, which I'm more of a vape person these days.

You just got more vapor from the PlumTec! What a surprise, but I was wrong!

Frankly, if you just look at the specs of the device, you could argue that one is better than the other, or that one is better than the other, but I was quite satisfied with the Plumtec Plus kicks.

I went to the trouble of buying nic liquids for this kick, but it's a hassle and tastes better than the weird nic liquids.

Seriously, if you're thinking, "I'm interested in PlumTec, but it's too light," I'd like you to give it a try.

postscript

We have been a bit busy lately and have not been able to review the requests we have received, and we apologize for the inconvenience to those who have provided us with samples.

I am hoping that you can give me a few more days to finish up the flurry of my main business in the next few days.

Well, I have an early day tomorrow, so I'll leave it at that.

I got a bit carried away and made it long... Thanks for your time.

As of 2021, the Plumtec Plus is also available, and its successor, the Plumtec Plus With, is currently on the market.

Plumtec Plus Wiz
Plumtec Plus Wiz

An evolution of Plumtec Plus!

The PlumTec is a dramatic evolution of the PlumTec, a device that is truly the next generation of cigarettes.
2,980 yen

How Was This Flavor?

Aggregates ratings in 1 click from users aged 20 or older who have actually used the selected brand. By pressing the button, you agree that you are 20 or older and that your response will be used for anonymous aggregation. Response counts are displayed from 5 or more. Options are limited to brands registered in the product master.

1 Did not suit me — 5 Liked it

When you select a brand, the average is displayed if there are 5 or more responses.

Also rate sweetness, menthol, etc.

Comment

  1. むてあん says:

    Ploom S, I have purchased it.
    As a result of trying all of them, including the Ploom TECH+, ...... I thought that I would most likely purchase more Ploom TECH+ eventually, lol.

    [Impression of capsule (Ploom TECH+)
    0 Mild Blend: Matcha or green tea, or whatever the tea flavor is.
    0 Roasted Blend: Mocha-like flavor like Plum TECH's Brown Aroma.
    0 cold mint: the more minty of the two minty types.
    0 clear mint: The very flavor of a certain green gum that they give you at yakiniku restaurants to cleanse your palate.

    [Impressions of cigarette sticks (Ploom S)
    0Regular taste: The tobacco flavor is conveyed well, but the aftertaste is refreshing.
    0 menthol: Anyway, sharp menthol sensation. If you smoke it when you wake up from sleep, it will wake you up.
    0 Menthol Cool Effect: Menthol sensation that is neither weak nor strong. The menthol lingers in the mouth for a long time, giving a refreshing impression.

    As per MOQLOG's review, the Ploom TECH+ has an increased tobacco feel and much more vapor.
    I didn't feel much of the thirst-like gargle sensation that I've had with traditional Ploom TECH.

    Ploom S doesn't produce much vapor. It may produce less vapor than the traditional Ploom TECH. But it has a strong tobacco feel.
    Then they seem to say cleaning after about 20 smokes, but the clerk at the Ploom Shop said that cleaning after about 200 smokes would be fine.
    The tobacco sticks at the end of the smoke were hardly burnt and certainly seemed to be cleaned infrequently.

    I would love to hear what various people think about it.

    • げんちゃん says:

      anxiety-proofing

      Hi - that's awesome that you bought it on the same day!

      And thank you for your valuable feedback.

      The Ploom S may seem faint at first due to its slow startup, but it gives the impression of a wonder child that picks up steam from the middle to the latter half of the bottle.

      Yes, the cleaning was questionable because I don't burn cigarettes, but I didn't expect 200 cigarettes.

      Reference!

  2. かずな says:

    I measured the actual resistance value marked on the commemorative Ploom TECH+ I purchased.
    Of course, I have not registered as a Ploom TECH+ user!

    Measurement Result
    Ploom TECH stock is 0.31Ω (0.30-0.31Ω depending on individual error)
    The Ploom TECH+ was 0.25 ohm and I only have 4 of them and they were all exactly 0.25 ohm.
    808ES Ploom TECH compatible atomizer made by Sapphire Electronics Co.
    https://www.amazon.co.jp//dp/B07HNZQPDM/ was also measured.
    Although the resistance was somewhat lower than stock, the error was large.

    Ploom TECH stock 0.30~0.31Ω http://bit.ly/2Kj3uxj
    Ploom TECH + stock 0.25Ω http://bit.ly/2KkXggn
    Ploom TECH compatible atomizer 808ES 0.25-0.29Ω http://bit.ly/2KizD82

    I need to clean the tester....
    Recently, the contact points are not making good contact, and I need to disassemble and maintain them.

    >I was not given the resistance value of the cartridge for Plumtec Plus,
    > I think the sensation is about 1.5 ohms.
    > The conventional PlumTec was 3.0 ohm, so it makes sense that it produces almost twice as much vapor.

    • げんちゃん says:

      kasunasan (variety of wild ginger, Zingiber officinale)

      It's been a while - for some reason I didn't notice your comment because it was in spam (sweat).
      But did you figure the resistance? It would be helpful!
      Was the positive resistance 2.5 ohms...it seems to have changed somewhat.
      Thank you for the valuable information.
      I'll check it out next time too!

  3. かずな says:

    Oh, hello!
    I had forgotten about it because my comment was not reflected and I had skipped it too. w
    First of all, there is a correction. The decimal point in the measured values was incorrectly listed.
    The correct answer is as follows.

    Ploom TECH stock 3.0-3.1Ω
    Ploom TECH compatible atomizer 808ES 2.5~2.9Ω
    Ploom TECH + stock 2.5Ω

    Ploom TECH+ is rated, but this is the specification on the charging side.
    > Rated voltage 5V
    > Rated current 1.5A

    Place a tester rod over the terminals that contact the atomizer,
    It measures 3.9V for a moment when you cover it with your hand and inhale.
    However, if the load (atomizer) is not connected
    Abnormality detection stops the output, as well as a dead battery.
    It goes into red LED flashing mode.

    Since the standard voltage of Li-ion rechargeable batteries is generally 3.3 to 3.4V,
    We assume that the voltage is boosted to 3.9V by a DC/DC converter.
    Substituting Ohm's law I=V/R (I=current, V=voltage, R=resistance)
    3.9(V)/2.5(Ω)=1.56(A)
    W=V*I Therefore 3.9(V)*1.56(A)=6.08(W)

    On the other hand, the voltage of the original Ploom TECH was about 3.1V in actual measurement.
    3.1(V)/3.0(Ω)=1.03(A) 3.1(V)*1.03(A)=3.19(W)

    Thus, even if the resistance of the atomizer is the same, the voltage doubles.
    The current flow is also doubled and the amount of heat generated is also approximately doubled.
    Ploom TECH+ increases the voltage as well as decreases the resistance.
    It is assumed to generate nearly twice as much vapor.
    (For calculation purposes, "nearly twice as much vapor is produced" is correct.)

    I really wish I could measure the actual current,
    The voltage can be measured by connecting in parallel to the circuit,
    Ammeter is connected in series to the circuit for current (wires are cut and interrupted)
    The process is a little more demanding because it requires modifications to be made.

    • げんちゃん says:

      kasunasan (variety of wild ginger, Zingiber officinale)

      Hello, it's been a while.
      Thank you for the detailed report!
      I kind of wanted to buy a tester too when I saw Kazuna's message.
      I will try mine with reference to the decision.
      Thank you for all the detailed information!

  4. かずな says:

    At a minimum, a tester is a family necessity.
    There is also a stationary digital matinee meter,
    Current measurement with WI-FI AP repair https://youtu.be/meg3rNEsy4A

    It has been sullied by many other things and is used (out of lease).
    DC power supply x2, Digimals, power meter, frequency counter,
    Digital signal generators, spare parts, etc.
    It was a big problem and when I called for a moving estimate.
    When it came to the "business plan," they left the rice and ran back. w

    • げんちゃん says:

      kasunasan (variety of wild ginger, Zingiber officinale)

      Good evening, is that a digital multimeter? That's great (sweat)!
      I don't see how that's possible on the WWW when it comes to business plans.
      It's cheap, but tester, I popped it in!
      I'm looking forward to receiving it!
      Thank you for all your expert information!

  5. かずな says:

    I'm so glad you popped in!
    Digital testers are widely used, though, where the values can be read directly,
    Analog is more advantageous when there are momentary fluctuations.
    It depends on the object.
    To observe fluctuations more accurately, use an oscilloscope.

    I think the usage is automatic range switching if it's digital,
    In the case of analog, measurement should be taken from a higher range.
    For example, measuring 100 VAC with the 10 VAC range will burn out the needle.

    Even with digital, if the measurement mode (voltage, current, resistance) is wrong
    If the internal protective fuse blows or you are unlucky, it will break in one shot.
    Be careful, because you will get hit pretty hard.

    • げんちゃん says:

      kasunasan (variety of wild ginger, Zingiber officinale)

      Good evening - I had imagined something a bit simpler, but I left it completely unused (sweat).
      It is a Chinese product called VAPCELL YR1030, but I will try my best to translate and use it little by little.
      But Kazuna-san knows things - I'm learning a lot.

      • かずな says:

        This is a "battery tester" that determines battery life and aligns performance.
        https://japanese.alibaba.com/product-detail/lithium-battery-tester-yr1030-60664628959.html
        https://s.click.aliexpress.com/e/jsBRdnw

        A battery has an internal resistance, and the lower this value is, the higher current can be drawn.
        The internal resistance increases from a full charge to the end of discharge in one use.
        In addition, internal resistance gradually increases over the lifetime of the device as it is repeatedly charged and discharged.
        So if the internal resistance is high, current cannot be extracted,
        Charging = work that lowers internal resistance; discharging = work that increases internal resistance,
        I guess you could say that life span = a condition where the internal resistance rises quickly!
        However, if internal resistance is low, self-discharge current is large and stored without use
        Even just doing so will speed up the loss of the remaining amount.

        For harsh applications that require high current and rapid charging, such as mini 4-wheel drive
        Measure the internal resistance of multiple cells and align their performance.
        Aligning the internal resistance prevents the load from being concentrated in a particular cell.
        https://poke4wd.hatenablog.com/entry/2018/08/03/003945

        Perhaps, perhaps, but I don't think it is very useful.
        I recommend returning the product or exchanging it for a regular tester if it is returnable.

        Ordinary testers are measuring instruments that can measure voltage, current, and resistance.
        The internal resistance can be measured with an ordinary tester using the open circuit voltage (voltage at no load) and
        It is calculated from the amount of voltage drop when a pseudo load is connected.

        High school physics.
        http://www.wakariyasui.sakura.ne.jp/p/elec/kairo/kidenn.html
        http://www.remff.co.jp/2017/03/13/internal-resistance/

        • げんちゃん says:

          kasunasan (variety of wild ginger, Zingiber officinale)

          Seriously... I did it.
          I'll give up on returning it because of the hassle of sending it back to China and the hassle of dealing with it on the World Wide Web.
          I will look for another one!

          But thanks again for your detailed explanations!
          I'm going to study a little bit with the link you posted for reference.
          By the way, do you have any testers you would recommend, Kazuna?

          • かずな says:

            I needed the formulas and applied formulas for my job. I was restructured,
            I am a former member of "Bazaar Gozaru" and "N Seijin" cell phone makers.

            Sanwa is a long-established tester, but would you like a pocket type?
            https://www.amazon.co.jp/dp/B000JQEUX8
            Sanwa is a bit expensive, but I think a Japanese instruction manual is essential.
            https://www.amazon.co.jp/s?srs=5313050051&rh=n%3A2541712051
            Ohm Denki The popular model also comes with a Japanese-language manual.
            https://www.amazon.co.jp/dp/B005BE4XZS

            I think it is safe to say that around 1,000-2,000 yen with a Japanese instruction manual is safe.
            Some cheap products are really cheap, though,
            https://www.amazon.co.jp/dp/B003272E48

            In this "Read reviews on topics you are interested in" -> "Japanese description".
            Narrowing down the reviews, it seems that many people still can't use the product because there is no instruction manual.
            You know, "the fuse blew, and the replacement had a blown fuse too."
            I want to say that Anta is cutting it with the wrong measurement mode or range.
            The internal photos make it seem impossible....
            https://www.amazon.co.jp/gp/customer-reviews/R3D6FDNQVGC5QI/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B003272E48

            The three terminals that line up horizontally and vertically on the battery are lead connection terminals, right?
            The specifications say it can measure up to 1000 VDC/750 VAC,
            If a high voltage is applied, it would spark discharge between the dry cell and the battery.
            Only the features are plentiful, capacitor capacity (not very reliable),
            Transistor check mode (not very reliable),
            Diode mode (analog and digital polarity reversal, but equivalent is possible without the function),
            Continuity mode (buzzer), etc. It may be useful to have a continuity mode.

          • げんちゃん says:

            kasunasan (variety of wild ginger, Zingiber officinale)

            Thank you for the Sanwa tester information!
            I am going to snap up the first one you recommended.
            The Japanese instruction manual is very important.
            I still don't know what the vapcell at home says, so I'm still chomping at the bit (laughs).
            Thanks for the advice!

            Shikazuna-san, you worked for an electronics manufacturer.
            They are a manufacturer that has helped us with both PCs and cell phones.
            No wonder you know so much.

            I will report back to you when I receive the potholder at home!

en_USEnglish
Moclog is a blog about tobacco.
You are over 20 years old, correct?
No, sir.
🌐 English